 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de ELECTRONIC COMPONENTS Anderungen vorbehalten / subject to change without notice 150 WATT SWITCHING POWER SUPPLIES DESCRIPTION The PU150 series comprises single and multiple output models for 150 watts of continuous output power. Auto-ranging input allows them to operate from any line voltage throughout the world without a selector strap. All auxiliary outputs are with magnetic amplifier to keep regulation. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking, in 1U height. PU150 SERIES (LVD) F E AT U R E S Auto-ranging input Overvoltage protection Short-circuit protection with auto-recovery Power Fail Detect PFD signal on models With 5V output 100 burn-in at full rated load I N P U T S P E C I F I C AT I O N S Input voltage Input frequency Input current Leakage current 8 5 t o 1 3 2 VA C , o r 1 7 0 t o 2 6 4 VA C a u t o - r a n g i n g 47 to 63 Hz 3 . 4 A r m s f o r 11 5 VA C 2 . 0 A r m s f o r 2 3 0 VA C 0 . 4 m A m a x . @ 11 5 VA C , 6 0 H z 0 . 8 m A m a x . @ 2 3 0 VA C , 5 0 H z S a f e t y St a n d a r d A p p ro v a l s UL 60950-1 File No. E137410 CSA C22.2 No. 60950-1 File No. LR93632 TUV EN60950-1 Certificate No. R9954992 GENERAL SPECIFICATIONS Switching frequency Efficiency Hold-up time Line regulation Inrush current 120KHz 15% 70 typical on all models 15 msec minimum at 115VAC 0.5 maximum at full load OUTPUT SPECIFICATIONS Output voltage/current Total output power See rating chart 150 watts maximum at 30 CFM forced air cooling or 110 watts maximum at convection cooling 1 peak to peak maximum Ripple and noise Overvoltage protection Provided on output #1 only; set at 112-136 of its nominal output voltage All outputs protected to short circuit conditions All outputs 0.04 maximum / Overcurrent protection Temperature coefficient 20 amps @ 115VAC, or 40 amps @ 230VAC, at 25 cold start Withstand voltage 3000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF 300,000 hours minimum at full load at 25 ambient, calculated per MIL-HDBK-217F EMC performance (EN55024) EN55022: FCC: VCCI: EN61000-3-2: EN61000-3-3: EN61000-4-2: EN61000-4-3: EN61000-4-4: EN61000-4-5: EN61000-4-6: EN61000-4-8: E N 6 1 0 0 0 - 4 - 11 : Class B conducted, Class B radiated Class B conducted, Class B radiated Class B conducted, Class B radiated Harmonic distortion, Class A Line flicker ESD, 8KV air and 4KV contact Radiated immunity, 3V/m Fast transient/burst, 1KV Surge, 1KV diff., 2KV com. Conducted immunity, 3Vrms Magnetic field immunity, 1A/m Voltage dips, 30 reduction for 500ms and > 95 reduction for 10ms Transient response Maximum excursion of 4 or better on all models, recovering to 1 of final value within 500us after a 25 step load change E N V I R O N M E N TA L S P E C I F I C AT I O N S Operating temperature St o r a g e t e m p e r a t u r e Relative humidity Derating 0 to +70 -40 to +85 5 to 95% non-condensing Derate from 100 at +50 Linearly to 50 at +70 1-11 AUTORANGING INPUT OUTPUT VOLTAGE/CURRENT RATING CHART (1)(2) Model PU150-10B PU150-12B PU150-13B PU150-13-1B PU150-14B PU150-16B PU150-17B PU150-18B PU150-23B PU150-24B PU150-25B PU150-30B PU150-31B PU150-32B PU150-33B PU150-40B PU150-41B PU150-42B PU150-44B PU150-45B Notes: 5V 12V 15V 18V 24V 30V 36V 48V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V Output #1 (3) 0A 0A 0A 0A 0A 0A 0A 0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A 30A 12.5A 10A 8.3V 6.3A 5.0A 4.2A 3.1A 22A 22A 22A 22A 22A 22A 22A 22A 22A 22A 22A 22A 35A 14.5A 11.6A 9.7A 7.3A 6.0A 4.8A 3.6A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A 30A 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% Output #2 Vnom. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0A 8A 0A 6.4A 0A 4.5A 0A 8A 0A 8A 0A 6.4A 0A 6.4A 0A 8A 0A 6.4A 0A 8A 0A 8A 0A 8A Output #3 Imin. Imax. Tol. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0A 2.5A 0A 2.5A 0A 2A 0A 2.5A 0A 2.5A 0A 2A 0A 2.5A 0A 2A 0A 2.5A PU150 SERIES Output #4 Vnom Imin. Imax. Ipeak Tol. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0A 5A 0A 4.5A 0A 4.5A 0A 4A 0A 4.5A Output Power 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W Vnom Imin Imax. Ipeak Tol. Vnom Imin. Imax. Ipeak Tol. +12V +15V +24V +12V +12V +15V +15V +12V +15V +12V +12V +12V 10A 8A 5A 10A 10A 8A 8A 10A 8A 10A 10A 10A 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% -5V -12V -15V -12V -12V -15V -12V -15V -12V 3% 3% 3% 3% 3% 3% 3% 3% 3% 5V 24V 12V 15V 24V 5A 5A 5A 4.5A 5A 3% 3% 3% 3% 3% (1) Safety agency approvals are for the above listed models in U-braket format. To order model with a matallic cover, change suffix "B" to "C" for enclosed format (mechanical details shown in page7-3). e.g. PU150-45C (2) Output #1 can be built for one-wire current sharing. Add suffix "Z", e.g. PU150-45B-Z for this requirement. (3) The maximum current of each output shall be derated to 75% if no forced air is provided by user. (4) The output #1 of all multiple output models needs a minimum load of 2A to support the other outputs at their maximum rated loads. MECHANICAL SPECIFICATIONS Single Output models NOTES: 1. 2. 3. 4. 5. 6. Dimensions shown in inch [mm] Tolerance 0.02 [0.5] maximum Input connector P1 mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. Output connector P3 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100. Weight: 0.84 kgs (1.86 Lbs.) approx. Multiple Output models NOTES: 1. 2. 3. 4. 5. 6. Dimensions shown in inch [mm] Tolerance 0.02 [0.5] maximum Input connector P1 mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. Output connector P3 mates with Molex housing 09-50-3091 and Molex 2878 series crimp terminal. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100. Weight: 0.84 kgs (1.86 Lbs.) approx. 1-12 AUTORANGING INPUT PIN CHART Single Output Models CONN PIN MODEL PU150-10 PU150-12 PU150-13-1 PU150-16 PU150-18 PU150-13 PU150-14 PU150-17 AC NEUTRAL AC NEUTRAL AC LIVE AC LIVE AC GROUND AC GROUND COM. RET. COM. RET. OUTPUT #1 PU150 SERIES P1 1 2 3 1 P2 2 1 PFD P3 2 N.C. 3 COM. RET. OUTPUT #1 N.C. N.C. N.C. CONN PIN MODEL PU150-10 PU150-13 PU150-14 PU150-17 PU150-12 PU150-13-1 PU150-16 PU150-18 COM RET INHIBIT -Ve INHIBIT +Ve N.C. N.C. P4 1 2 3 4 5 6 7 8 COM. RET. -SENSE +SENSE CURRENT SHARE Multiple Output Models CONN MODEL PU150-23 PU150-25 PU150-30 PU150-32 PU150-40 PU150-42 PU150-45 PU150-31 PU150-33 PU150-41 PU150-44 PIN PU150-24 1 AC AC P1 2 AC AC 3 AC AC 1 COM. RET. COM. RET. COM. RET. P2 2 OUTPUT #1 OUTPUT #1 OUTPUT #1 1 N.C. N.C. OUTPUT #4 RETURN 2 N.C. N.C. OUTPUT #4 3 PFD PFD P3 4 N.C. OUTPUT #3 OUTPUT #3 5,6,7 COM. RET. COM. RET. COM. RET. 8,9 OUTPUT #2 OUTPUT #2 OUTPUT #2 NEUTRAL LIVE GROUND NEUTRAL LIVE GROUND AC AC AC NEUTRAL LIVE GROUND PFD CONN PIN MODEL PU150-23 PU150-31 PU150-42 PU150-45 PU150-24 PU150-33 PU150-25 PU150-32 PU150-41 INHIBIT -Ve INHIBIT -Ve INHIBIT +Ve INHIBIT +Ve +15V (FAN) +24V (FAN) PU150-30 PU150-40 PU150-44 INHIBIT -Ve INHIBIT +Ve +12V (FAN) 1 2 3 4 P4 5 6 7 8 N.C. COM RET. COM. RET. COM. RET. -SENSE +SENSE CURRENT SHARE CURRENT SHARE CURRENT SHARE N.C. N.C. -SENSE -SENSE +SENSE +SENSE 1-13 |
Price & Availability of PU150-33B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |